Mudhugger EVO (Long) Bolt-On Front Mudguard
Mudhugger EVO (Long) Bolt-On Front Mudguard
Mudhugger EVO (Long) Bolt-On Front Mudguard
Mudhugger EVO (Long) Bolt-On Front Mudguard
Mudhugger EVO (Long) Bolt-On Front Mudguard
Mudhugger EVO (Long) Bolt-On Front Mudguard

Mudhugger EVO (Long) Bolt-On Front Mudguard

$69.99
Quantity:

More From Mudhugger

Pickup available at County Cycle Usually ready in 24 hours

Mudhugger EVO (Long) Bolt-On Front Mudguard

County Cycle

Pickup available, usually ready in 24 hours

4977 King Street
Beamsville ON L0R 1B0
Canada

+12895668855

Hours

M-F 9am-6pm / Sat 9am-5pm

Long Mudhugger EVO MTB mudguard, designed and made in the heart of the UK from waste plastic. Compatible with most Fox forks (see below). Your fork must have bolt holes in the fork brace to fit an EVO Bolt-On Mudguard.

We’ve had the benefit of designing Mudhugger EVO MTB mudguard around the 2021 FOX 36 and 38’s and 2021 Rockshox ZEB and Domain to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with older (2017 onwards) FOX forks 34 and 36 (including Fox/Marzocchi) which have bolt holes. 

Bolts directly to the back of the fork brace. Default FOX kit Supplied with rubber pads, bolts, washers and hex key to install to your FOX forks. For ZEB, new Domain, Recon, DVO and Ohlins an ADAPTER PACK is required, sold separately.

  • More mud clearance.
  • No more crown fouling at full compression.
  • Stiffer.
  • Optimum length, not too short, no longer than needed.
  • Subtle kicker to keep length as short as possible without compromising spray protection.
  • Extra tabs for Quick Fit straps for wider DH forks.
  • 100% recycled PP.
  • Designed, made and packed in the UK.

Length - 515mm total - Rear extension 330mm, front extension 185mm

Weight - 125g, without fittings.
  • Adapters sold separately for other fork brand fitting. This version is NOT compatible with the 2026 FOX 36.
  • Minimum compatible fork offset: 44mm.
  • Not compatible with Marzocchi Bomber Z2 or the updated 2025 Z1 (no bolt holes in fork brace). Not compatible with 38mm offset ZEB.
  • This is NOT compatible with FOX AWL forks (no bolt holes) or FOX Live Valve (fouling issue).
  • For 2022 onwards Fox 34 you'll need to use the Quick Fit Kit For Front EVO Mudhugger kit as the fork brace is hollow and the bolts have very little to tighten to.
  • Sadly the Fox 34 stepcast fork is too narrow to accept the EVO Mudhugger MTB mudguard.
  • Also compatible with Ohlins RXF and DH forks (adapter bracket required).
  • Compatible with most RS RECON GOLD & SLIVER 35. Use the angle adjuster shim included in the default fitting kit along with the 6mm bolt (sold separately).
  • For all Downhill forks (not compatible with older 650b FOX 40's) we have the Quick Fit Kit For Front EVO Mudhugger which are used to brace the Hugger in the wider DH forks. You will still need separate adapter for Ohlins DH forks.