Mudhugger Shorty EVO Bolt-On Front Fender
Mudhugger Shorty EVO Bolt-On Front Fender
Mudhugger Shorty EVO Bolt-On Front Fender
Mudhugger Shorty EVO Bolt-On Front Fender
Mudhugger Shorty EVO Bolt-On Front Fender

Mudhugger Shorty EVO Bolt-On Front Fender

Sale price$69.99
Quantity:

More From Mudhugger

Pickup available at County Cycle Usually ready in 24 hours

Mudhugger Shorty EVO Bolt-On Front Fender

County Cycle

Pickup available, usually ready in 24 hours

4977 King Street
Beamsville ON L0R 1B0
Canada

+12895668855

Hours

M-F 9am-6pm / Sat 9am-5pm

Shorty Bolt-on EVO MTB mudguard, designed and made in the heart of the UK from waste plastic. Compatible with most Fox forks (see below).

Your fork must have bolt holes in the fork brace to fit an EVO Bolt-On Mudguard.

We’ve had the benefit of designing the Mudhugger EVO MTB mudguard around the 2021 FOX 36 and 38’s and 2021 Rockshox ZEB and Domain to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with older (2017 onwards) FOX forks 34 and 36 (including Fox/Marzocchi) which have bolt holes.

Bolts directly to the back of the fork brace. Default FOX kit supplied with rubber pads, bolts, washers and hex key to install to your FOX forks. For ZEB, new Domain, Recon, DVO and Ohlins an ADAPTER PACK is required.

  • Shorty version of the LONG EVO
  • More mud clearance.
  • No more crown fouling at full compression.
  • Stiffer.
  • Subtle kicker to keep length as short as possible without compromising spray protection.
  • Extra tabs added for quickfit straps for wider DH forks.
  • 100% recycled PP.
  • Designed, made and packed in the UK.

Length - 390mm total - Rear extension 255mm, front extension 105mm

Weight - 100g, without fittings.

  • Adapters sold separately for other fork brand fitting. This version is NOT compatible with the 2026 FOX 36.
  • Please note this is NOT compatible with FOX AWL forks (no bolt holes) or FOX Live Valve (fouling issue).
  • Minimum fork offset: 44mm
  • Not compatible with 38mm offset ZEB. Adapter required for other ZEB and Domain Models (sold separately).
  • Not compatible with Marzocchi Bomber Z2 or updated 2025 Z1 (no bolt holes in fork brace).
  • For 2022 onwards Fox 34 you'll need to use the Quick Fit Kit For Front EVO Mudhugger kit as the fork brace is hollow and the bolts have very little to tighten to.
  • The FOX AWL chassis has no threaded bolt holes and therefore is not compatible.
  • Sadly the Fox 34 stepcast fork is too narrow to accept the EVO Mudhugger mtb mudguard.
  • Also compatible with Ohlins RXF and DH forks (adapter bracket required, see link above).
  • Compatible with RS RECON GOLD & SLIVER 35. Use the angle adjuster shim included in the default fitting kit along with the 6mm bolt (sold separately) see link above.
  • For all Downhill forks (not compatible with older 650b FOX 40's) we have the Quick Fit Kit For Front EVO Mudhugger which are used to brace the Hugger in the wider DH forks. You will still need to order the separate adapter for Ohlins DH forks.